Product Listings

Product Listing By Type

Alkyd Enamels

1-100 UNI-ALKYD

Alkyd Semi-Gloss White - A durable alkyd (oil) based semi-gloss enamel. Excellent holdout, good flow and leveling. Perfect for spraying, excellent one coat coverage over properly prepared surfaces.

2-100 UNI-ALKYD

Alkyd High-Gloss White - A durable alkyd (oil) based paint with a beautiful gloss enamel finish. Mildew and fade-resistant, washable finish. Excellent flow and leveling. Interior or exterior use.

Primer and Undercoats

3-120 PRO-KOTE

Alkyd Interior Enamel Undercoat - A scientifically balanced interior primer coat for new or previously painted surfaces. It has excellent sealing holdout and sanding properties. This heavy bodied product produces a uniform finish coat and a durable foundation succeeding coats of paint.

3-125 PRO-KOTE

Alkyd Exterior Primer - A scientifically balanced primer and first coat for new or previously painted outdoor surfaces. An excellent primer for bare wood. It is made with specially prepared oils that provide elasticity, adhesion and controlled penetration. This heavy bodied product has good hiding and produces a uniform, durable foundation for succeeding coats of paint.

3-127 PRO-KOTE

Alkyd Interior Fast Dry Primer - A scientifically balanced interior primer and first coat for new or previously painted surfaces. Designed for "stain killing" use with exceptional hide. It has excellent sealing, holdout and sanding properties. This heavy bodied product produces a uniform finish coat and a durable foundation for succeeding coats of paint.

3-150 BLOCK FILLER

Acrylic Block Filler - A 100% acrylic "high solids" water-based coating formulated to be a prime coat on porous masonry substrates including CBS block. The high solids and alkali resistant binder enables it to be an excellent foundation for filling in minor voids and sealing a cement-type surface.

3-506 RED OXIDE

Metal Shop Primer - An industrial alkyd rust-inhibitive metal primer formulated for ferrous metal substrates. Excellent for use as an economical rust protection over bare metal. May be applied by brush, roller or airless sprayer. Formulated to prevent against rust.

3-2000/3-2002 ULTRA-PRIME

Flash Bond Industrial Primer - An industrial rust-inhibitive metal primer formulated for ferrous and non-ferrous metal substrates. Excellent adhesion to a variety of substrates for scaling and rust protection.

24-100 PRIMT-IT

A high-performance 100% acrylic water-based primer formulated for priming bare wood or ferrous metal. Excellent hiding, super adhering primer scaler that will seal most tannin stains when properly used and will also inhibit flash rusting. Interior/Exterior. Apply with brush, roller or spray.

24-111 ULTRA PREP

Ultra-Prep is a high-performance 100% acrylic water-based primer/sealer that can replace interior oil-based alkyd primers and exterior non-ferrous metal primers. Ultra-Prep is formulated for priming interior bare wood or exterior non-ferrous metal. Ultra-Prep serves as an excellent foundation for subsequent coats of trim enamels. Ultra-Prep will also seal stains on drywall or other types of interior substrates. Ultra-Prep is a super adhering primer/sealer that will also seal most tannin or water stains when properly used.

Latex Semi-Gloss Enamels

5-100 UNI-LATEX

Int./Ext. Latex Semi-Gloss Write - A durable latex-based semi-gloss enamel. Excellent holdout, good flow and leveling. Perfect for spraying. One coat coverage over properly prepared surfaces. Interior or exterior use.

5-100DF DRY FALL

Uni-Latex Dry Fall Enamel - A 100% acrylic dry fall enamel specially formulated for airless spray so that the paint will dry before the overspray hits the ground (8 foot drop). Excellent for use on all overhead surfaces. The film dries to a durable, washable finish. Excellent for all masonry or primed metal surfaces. Can also be used on wood.

6-100 PRO-KOTE

Interior Latex Semi-Gloss White - A durable latex-based semi-gloss enamel. Excellent for use when a durable washable finish is desired. Perfect for spraying one coat coverage over properly prepared surfaces. Interior use only.

100% Acrylic Enamels

51-100 ULTRA GLOSS

Exterior Acrylic Gloss Enamel - A durable 100% acrylic latex gloss enamel. Mildew and fade-resistant finish. Exceptionally washable and durable non-yellowing enameled finish. One coat coverage over properly prepared surfaces. Excellent flow and leveling with superior adhesion.

57-100 HYDRO-NAMEL

Exterior Acrylic DTM Enamel - A durable 100% acrylic industrial gloss enamel specially formulated for use over properly primed metal substrates and aluminum. An environmentally friendly waterborne enamel. Mildew and fade-resistant finish. One coat coverage over properly prepared surfaces. Excellent flow and leveling with superior adhesion and durability.

57-1331 HYDRO-NAMEL BRONZE TONE SATIN

Hydro-Namel - A durable 100% acrylic industrial enamel specially formulated for use over properly primed metal substrates and aluminum. An environmentally friendly waterborne enamel. Mildew and fade-resistant finish. One coat coverage over properly prepared surfaces. Excellent flow and leveling with superior adhesion and durability.

Latex Interior Flat Wall Paint

7-104 INTERIOR FLAT LATEX POPCORN

Interior Flat Latex Popcorn - A product formulated for interior surfaces. High hiding, production-grade flat. Good touch ups. Available in white, off whites (standard popcorn white) and light tints.

18-100 WALL-MASTER

Wall-Master is an upgraded interior latex flat wall coating that is formulated for use on interior wall surfaces. Wall-Master interior flat is high hiding, and dries to a "dead flat" finish to ensure positive touch ups. The upgraded film finish and integrity of Wall-Master latex flat has above average washability over sound surfaces. Home builders and painting contractors can offer their customers a washable wall system at a economical price. Available in white, off whites (standard popcorn white) and light tints.

20-100 UNI-LATEX

Interior Latex Flat White premium interior flat coating with excellent hiding and washability. A top-quality interior paint formulated for high performance. Can be used on primed metal and non-bleeding-type woods. Available in a full range of colors.

22-100 UNI-LATEX SATIN

Interior Latex Satin White- A premium interior satin/eggshell finish with excellent coverage and washability. After being allowed to cure for 7 days, this product may be scrubbed with a mild detergent and water to remove most stains. Can be used on primed metal and non-bleeding-type woods. Available in a full range of colors.

Exterior Stucco Paints

15-100 UNI-KOTE

Exterior Latex Flat White - A premium vinyl acrylic/copolymer exterior/interior emulsion-based coating. Quick drying to a tough, flexible, washable, mildew-resistant, fade-resistant finish. A top-quality all-purpose coating designed to give high-performance results. Excellent for exterior stucco, masonry surfaces; super for a washable interior paint. Can be used on primed metal.

16-100 STUKO-KOTE

Exterior Acrylic Flat White - A product formulated for new exterior masonry surfaces. A blend of special acrylic resins to give above-average exterior durability, while providing a coating with excellent alkali resistance. Available in white and light tint colors.

40-100 UNI-SHIELD

Exterior Acrylic Latex Flat - A product formulated to give years of maintenance-free service and durability. Excellent protection on exterior surfaces. Excellent for use on concrete, aluminum siding, wood surfaces, masonite siding, plaster and galvanized metal. Superior mildew resistance, fade resistance and adhesion.

42-100 STUKO-GUARD

Exterior Masonry Coating - A product formulated for exterior masonry surfaces. A blend of special acrylic resins to give excellent exterior durability. Dries to a tough satin finish to provide a durable, maintainable surface.

45-100 ULTRA-SHIELD

Exterior Acrylic Flat Finish - A top-quality 100% acrylic exterior flat latex paint. ULTRA-SHIELD is formulated to give years of maintenance-free service and durability. Excellent protection on exterior surfaces. Excellent for use on concrete, aluminum siding, wood surfaces, masonite siding, plaster and galvanized metal. Superior mildew resistance, fade resistance and adhesion. Available in a full range of colors.

50-100 ULTRA KOTE

Exterior Acrylic Satin Finish - The finest and most durable 100% acrylic latex satin paint fortified with a Teflon-type wax. Formulated to give years of maintenance-free service. Excellent adhesion and color fastness are a few of the sensational features that this product offers. Excellent for use on masonry, wood siding, primed metal, interior drywall, plaster, or galvanized metal. Available in a full range of colors.

55-100 STORM-SHIELD

Exterior High Solids, low sheen 100% Acrylic weather resistant Finish - The most durable 100% acrylic finish latex paint. STORM- SHIELD is specially formulated for use on exterior masonry substrates for a wind driven water resistant finish. This coating is higher in solids than conventional acrylic coatings and the high acrylic resins solids makes this coating extremely durable and weather proof. The low sheen or Egg Shell finish is ideal for use on smooth or float finish masonry surfaces to minimize surface imperfections. Available in a full range of colors.

60-100 UNI-LASTIC

100% Acrylic Elastomeric Waterproofing - An acrylic latex high solids, heavy-duty elastomeric membrane coating. Designed to waterproof, decorate and protect above-grade masonry surfaces. Ultra-Lastic Watershield envelopes the substrate with a tough, flexible, mildew-resistant, satin finish, durable coating. Ultra-Lastic is available in a full range of colors and textures.

80-100 STUKO-FLEX

Exterior Acrylic Flexible Stucco Coating - A high-build, high-performance exterior masonry coating that is specifically formulated for use in the Florida climate over new, unpainted stucco or cement substrates. The unique feature of Stuko-Flex is a water-resistant, mildew-resistant and alkali-resistant flexible coating. The high solids of Stuko-Flex enables the coating to fill and bridge existing hairline cracks in the stucco (minimizing efflorescence) while providing a water-resistant coating. The performance and durability of Stuko-Flex far exceeds that of a conventional paint. Stuko-Flex dries to a satin finish that will both decorate and protect exterior masonry surfaces.

Sealers

25-020 UNI-SEAL

Acrylic Masonry Chalky Wall Sealer Clear - A clear 100% acrylic, water-thinned coating. UNI-SEAL dries to a water clear, tough mildew-resistant finish. The film repels water and protects masonry from spalling and dusting. UNI-SEAL also restores aluminum siding to its original luster. UNI-SEAL will restore almost any surface that is showing sign of oxidation.

25-120 STUKO-SEAL

Acrylic Masonry Sealer - A special acrylic latex pigmented new masonry primer sealer. Formulated to be a first-coat primer sealer for new, unpainted stucco surfaces. A high-resin content provides an excellent alkali barrier sealer coat.

25-150 UNI-SEAL

Acrylic Chalky Wall Masonry Sealer White - A special 100% acrylic latex pigmented masonry primer sealer. The high-resin content provides excellent penetration and scaling and superior binding of chalky surfaces.

25-1000 STUKO-PROOF

Acrylic Alkali Resistant Masonry Sealer - A special 100% acrylic pigmented primer/sealer. Formulated as a sealer for new, unpainted stucco substrates. Stuko-Proof will waterproof new, unpainted stucco substrates as well as provide an excellent alkali barrier coating to minimize the problems associated with painting un-cured stucco or masonry substrates.

25-1700 WATER CLEAR

Clear Stone Glaze Mineral Spirits Based Sealer - A clear acrylic solvent-thinned coating. Dries to a clear, tough, mildew-resistant finish. The film repels water and protects masonry from spalling and dusting. Restores and seals stone facing, Chattahoochee* and stamped concrete driveways.

25-1782 STONE GLAZE

Clear Sealer Xylene-Based Sealer - A clear acrylic solvent coating. Stone Glaze dries to a water clear, tough mildew-resistant finish. The film repels water and protects masonry from spalling and dusting. Stone Glaze also restores and seals stone facing, Chattahoochee*, and stamped concrete driveways.

25-2200 UNI-TRED

Urethane Alkyd Chattahoochee Sealer - An amber-toned mineral spirits solvent-thinned coating with a tough mildew-resistant finish which repels water and protects and restores epoxy-set Chattahoochee from the elements. Ideal for Chattahoochee, brick or stone facing.

25-8200 QUICK SEAL

Masonry Sealer Clear - The finest chalky wall sealer available for use in today's market. A solvent rubber-based sealer using Goodyear Pliolite that inherently will not support mildew growth or break down with age and cause a loss of adhesion in the future.

56-140 RAIN-KOTE

Rain-Kote waterproofing system can be used both above and below grade. Excellent vapor barrier coating that resists both positive and negative hydrostatic pressure that will prevent moisture migration through the substrate to which it is applied.

Roof Coatings

8-100 PRO-KOTE

Flat Finish Roof Paint White - A Latex roof paint that cures to a tough, mildew-resistant flat finish. Roofs painted with Pro-Kote will stay whiter and appear cleaner longer than conventional roof paints.

8-111 PRO-KOTE

Flat Finish Roof Paint White - An acrylic latex roof paint that dries to a tough, mildew-resistant flat finish. Roofs painted with Bright White will stay whiter and cleaner longer than conventional roof paints. This coating contains a combination of fungicides including zinc oxide to achieve maximum mildew protection.

68-100 UNI-LASTIC

100% Acrylic Ponding Water Roof Mastica. One component water borne high-performance coating formulated for waterproofing roof decks. Formulated to withstand ponded water. Applied in a liquid state, dries to a highly reflective impermeable seamless membrane. Excellent adhesion. A waterproofing membrane coating.

84-100 UNI-ROOF

100% Acrylic Semi-Gloss Roof Coating White - An 100% acrylic latex semi-gloss Roof coating that dries to a tough, mildew-resistant satin gloss finish. The best protection for roofs against mold and mildew. The enameled surface will stay whiter and cleaner longer than conventional roof paints.

85-100 DURA-FLAT

100% Acrylic Roof Paint - An acrylic latex roof paint that dries to a tough, mildew-resistant "dead flat " finish. Roofs painted with Dura-Flat will minimize any existing surface imperfections better than conventional roof paints. This coating contains a combination of fungicides including zinc oxide to achieve maximum mildew protection. Excellent for use on cement tiles flat or barrel, mansard roofs and asphalt shingles.

87-100 ULTRA-ROOF

100% Acrylic Semi-Gloss Roof Coating White - A proprietary blend of 100% acrylic latex's incorporating "state-of-the-art technology" with a Teflon-type wax to achieve maintainable mildew and algae protection. Ultra-Roof dries to a tough, mildew and water-resistant satin gloss finish. The best protection for roofs against mold and mildew. The enameled Teflon-coated surface will stay whiter and cleaner longer than conventional roof paints.

Wood Finishes

19-000 ALKYD STAIN

Alkyd/Oil Transparent Stain Base - An alkyd stain having controlled penetration and formulated not to raise the grain of wood. It may be used inside or outside and provides excellent protection while preserving the grained beauty of the wood surface to which it is applied. It is recommended for use on wood siding, furniture, paneling, floors, cabinets and other wood surfaces.

39-000 AQUA-STAIN

Aqua-Stain can he used as a clear, solid, or semi-transparent stain. Aqua-Stain is a state-of-the-art water-based wood stain. Aqua-Stain will penetrate non-coated wood surfaces. Aqua-Stain is formulated to be used on vertical wood or horizontal deck surfaces which has walking traffic. Aqua-Stain cannot be used on areas that have heavy vehicular traffic. Aqua-Stain may be used on interior of exterior surfaces. The high concentration of proprietary mildewcides and algaecides provides excellent protection against the tropical elements while preserving the grained and natural beauty of the wood surface to which it is applied. Aqua-Stain is recommended for use on wood siding, furniture, paneling, floors, cabinets and other wood surfaces.

67-100 TIMBER-FLEX

Exterior Acrylic Flexible Wood Coating - An extremely flexible and durable coating, Timber-Flex will expand and contract with the substrate movement. Most paints become brittle and age, causing cracking and loss of adhesion flexibility. Timber-Flex acts as a sealant, preventing moisture from entering and preventing cracks in wood. New wood often contains hairline cracks as evaporation of moisture within the wood occurs. Cracks are the first areas to show paint failure; Timber-Flex will seal these areas.

Floor Coatings

4X-100 DEKO-TEK

Deko-Tek is state-of-the-art technology in a safety (non-skid) decorative, top-quality 100% acrylic textured deck topping system. Deko-Tek dries to a satin textured finish that will refinish almost any deck surface with a variety of patterns and multi-color designs. Deko-Tek's durability and maintainability exceeds that of conventional floor paints and contentious-type toppings. Deko-Tek is mildew and water resistant and can be used on a variety of flooring substrates such as concrete, wood, asphalt and previously painted surfaces. Environmentally safe for interior or exterior applications and cleans up with water.

47-100 ULTRA-TUFF

Acrylic High-Performance Floor Finish - State-of-the-art technology and a top-quality 100% acrylic waterborne high-performance finish for concrete floors, decks and areas such as driveways, where a tough coating is required to withstand vehicular traffic. Ultra-Tuff dries to a satin low-sheen finish that is mildew resistant, durable and resists cracking and fading. Environmentally safe for interior or exterior applications and cleans up with water.

47-0000 ULTRA-TUFF

Clear Urethane Acrylic Sealer - A specially formulated clear 100% urethane acrylic latex fortified with a water dispersible polyurethane elastomer to ensure adhesion to and durability over a variety of substrates. This coating can be used on surfaces that have moderate vehicular traffic or as a clean, non-yellowing, water-based varnish.

Traffic Coatings

30-WT-1

Latex Traffic Paint White - A product designed for exterior or interior surfaces that are properly prepared for painting. Meets or exceeds TTP-1952B.

30-WT-2

Latex Traffic Paint Yellow - A product designed for exterior or interior surfaces that are properly prepared for painting. Meets or exceeds TTP-1952B.

30-WT-3

Latex Traffic Paint Black - A product designed for exterior or interior surfaces that are properly prepared for painting. Meets or exceeds TTP-1952B.

30-WT-4

Latex Traffic Paint Blue - A product designed for exterior or interior surfaces.

Miscellaneous/Specialty Coatings

65-100 UNI-LASTIC

Mid Coat Fibered Mastic Waterproofing - A heavy-duty elastomeric membrane coating. Designed to waterproof, decorate and protect above-grade masonry surfaces. Ultra-Lastic Mid-Kote Mastic envelopes the substrate with a tough, flexible intermediate coating. Mid-Kote must be top coated.

70-100 ULTRA-THANE

Polyurethane Industrial Enamel - A durable two component high-performance industrial-grade acrylic aliphatic high-gloss catalyzed water reducible urethane coating. Outstanding gloss retention, excellent flexibility, chemical abrasion and water resistance. Does not contain noxious solvent and is non-flammable. Exterior or interior use where a tough, highly cleanable chemical and solvent-resistant coating is required. *Available In Metallic Finishes.

72-100 AWNING GUARD

100% Acrylic Textile Coating - Water-based proprietary blend of unique specialty polymers and additives formulated to recoat and rejuvenate any type of canvas, vinyl, or fabric. Awning Guard will restore and add a color coat water-resistant brilliance to almost any type of canvas, vinyl or fabric material. It will make the substrate that it is applied to ultra-violet light and mildew resistant. It will give the surface that it is applied on long-lasting protection against the sun and rain, and also fill in pin holes to make the substrate water resistant. Excellent coating for boat canvas.

75-100 POXY-KOTE

A durable interior-only two component high-performance polyamide chemical-resistant industrial-grade solvent epoxy coating. Poxy-Kote is a one-to-one ratio of equal parts coating and catalyst. Poxy-Kote can be used on numerous substrates where a brilliant high gloss, hard abrasion chemical and water-resistant coating is desired (machinery, steel, concrete, drywall, fiberglass, porcelain, floors, walls, tile, parking garage interior decks). A test patch should always be applied to previously painted surfaces to check compatibility with existing coating. Poxy-Kote dries to touch in 1-2 hours, fully cures in 6 days. Recoat within 18 hours or after 3 days.

75-456 FIBER-LASTIC

Elastomeric fibrous patching compound - A very thick, trowelable compound with high solids and fibers embedded. Non-shrinking, permanently flexible. Paintable. Super adhesion. Mildew and sulfide stain resistant. Excellent for masonry stucco, galvanized and aluminum.

400 Elastomeric Knife Textured Patching Compound
410 Elastomeric Brush Smooth Patching Compound
411 Elastomeric Knife Smooth Patching Compound
431 Elastomeric Brush Textured Patching Compound

75-500 DRI-VITT-PATCH

A durable high-performance industrial-grade 100% acrylic textured cement patch. Dri-Vitt-Patch is formulated to patch and fill cracks and voids in "Dry-Vitt" or EFIS panel systems. Dri-Vitt-Patch can also be used to re-float of touch-up scars and voids in existing EFIS trim of wall panels, patch and bonding paste.

75-900 POXY-PATCH

A durable two component high-performance industrial-grade 100% solids solvent epoxy cement patch and bonding paste. Poxy-Patch is formulated to fill cracks and voids in cement substrates such as catwalk decks, balustrades or structural columns and beams. Poxy-Patch can also be used to bond cementitious substrates together. A unique feature of Foxy-Patch is that it can also be used underwater to patch cracks or as anchoring cement. Poxy-Patch dries to a hard, durable, non-leaching rigid membrane filler and anchoring cement. Poxy-Patch can be factory tinted to custom match color to adjacent areas.

77-100 AQUA-POXY

A durable interior-only two component high-performance gloss finish 100% water-based epoxy coating. Aqua-Poxy is a chemical and abrasion-resistant heavy-duty epoxy coating for use in high-traffic commercial areas. Aqua-Poxy can be used on numerous substrates where a hard, abrasion impact, durable and chemical-resistant coating is desired: machinery, steel, concrete, drywall, fiberglass, porcelain, floors, walls, tile, parking garages and interior decks. A test patch should always be applied to previously painted surfaces to check compatibility with existing coating. Aqua-Poxy dries to touch in 1-2 hours, fully cures in 6 days. Recoat within 18 hours or after 3 days.

99-000 MILDEW-PREP

Mildew Treatment - A proprietary blend of mildewcides, algaecides, cleansing acids and wetting agents that when mixed in the proper ratio with sodium hypo-chloride will accelerate the termination of mildew and algae as a pre-treatment prior to painting a surface. A unique value to this solution is that it can be used as an intermediate sanitizing solution over previously painted or unpainted surfaces. Mildew Prep will destroy the foundation of mildew/algae growth and leave a residue (barrier coat) that will protect the substrate against the future growth of mildew.

99-2000 MILDEW-GUARD

Mildew Retardant - A proprietary aqueous blend of water-based siliconates that when applied according to directions will impart water resistance and retard fungus and mildew growth on unpainted brick facing, brick pavers, roof tiles and other concrete substrates. This coating will refresh and refinish weathered cement substrates and leave a clear glaze to impart water resistance to the substrate.